1) Suitable welding or cutting methods, which is particularly important for arc welding robots. This essentially reflects the anti-interference ability of robot control and drive system. At present, general arc welding robots only use MIG welding methods, because these welding methods do not need to use high-frequency arc ignition, and the control and driving system of welding robot has no special anti-interference measures, so TIG welding can be used. The welding robot is a new product in recent years. It has a set of special anti-interference measures. This should be noted when selecting robots.

2）擺動功能這對于弧焊機器人非常重要，它與弧焊機器人的工藝性能有關。目前，電弧焊機器人的擺動功能已經非常不同。有些機器人只有幾種固定的擺動模式，有些機器人只能在平面上任意設置擺動模式和參數。選擇是能夠在空間（xy，z）中移動。在該范圍內任意設置擺動模式和參數。

2) Swing function is very important for arc welding robot, which is related to the process performance of arc welding robot. At present, the swing function of arc welding robot has been very different. Some robots only have several fixed swing modes, and some robots can only set the swing modes and parameters arbitrarily on the plane. The choice is to be able to move in space (XY, z). Set the swing mode and parameters arbitrarily within this range.

焊接機器人實拍

Actual shooting of welding robot

3）焊接用戶點示教功能這是在焊接示教中非常有用的功能，即在進行焊接示教時，示教焊縫上某個點的位置，然后調節焊槍或焊鉗的姿勢。調整姿勢時，原始示教點的位置完全不變。實際上，機器人可以自動補償由于姿勢的調整而導致的住家點的位置變化，并確保住家點的坐標以方便教學操作者。

3) welding user point function, which is a very useful function in welding instruction, is to teach the location of a spot on the weld before carrying out the welding instruction, and then adjust the position of the welding torch or welding clamp. When adjusting the pose, the position of the original teaching point is completely unchanged. In fact, the robot can automatically compensate the position change of the home point caused by the posture adjustment, and ensure the coordinates of the home point to facilitate the teaching operator.

4）焊接過程故障的自檢和自處理功能。這是指焊接過程中常見的故障，例如電弧焊的粘絲，斷絲，點焊的粘焊條等。這些故障發生后，如果不及時采取措施，將會(huì )造成機器人損壞等重大事故。或出現報廢零件。因此，焊接機器人須具有檢測此類故障并自動實時停止和報警的功能。

4) Self inspection and self-treatment of welding process faults. This refers to common faults in the welding process, such as wire sticking in arc welding, wire breaking, welding rod sticking in spot welding, etc. After these faults occur, if measures are not taken in time, it will cause major accidents such as robot damage. Or scrap parts. Therefore, the welding robot must have the function of detecting such faults and automatically stopping and alarming in real time.

5）電弧點火和電弧閉合功能為了確保焊接質量，需要更改參數。在機器人焊接中，它應該能夠在教學過程中進行設置和修改，這是弧焊機器人不可或缺的功能。

5) Arc ignition and arc closing function in order to ensure welding quality, parameters need to be changed. In robot welding, it should be able to set and modify in the teaching process, which is an indispensable function of arc welding robot.

以上就是焊接機器人的特殊技術指標，如還有其它問題，可隨時聯系我們。

The above are the special technical indicators of the welding robot. If you have other problems, you can contact us at any time.